export@dhanwantmetal.com info@dhanwantmetal.com +91 98703 41219 +91 22 2385 5854 +91 22 6636 2854
Chemical and Mechanical Properties

Technical Information for Pipe Fittings, Round Bar and Flanges - Dhanwant Metal Corporation

Stainless Steel Chemical Properties

Grade C (Max) Mn (Max) P (Max) S (Max) Si (Max) Cr Ni Mo Nitrogen (Max) Cu/ Others
201 0.15 5.50/7.50 0.06 0.030 1.0 16.0/18.0 3.5/5.5 - - n-25 max
202 0.15 7.50/10.0 0.06 0.030. 1.0 17.0/19.0 4.0/6.0 - - n-25 max
JS- 203 0.08 9.2510.25 0.070 0.030 0.75 14.25 - 15.25 2.25 - 2.75 - - 1.60- 2.0
301 0.15 2.00 0.045 0.030 1.00 16.00 - 18.00 6.00 - 8.00 - 0.10 -
301M 0.10 4.55.5 0.060 0.030 0.75 14.50 - 15.50 6.0 - 7.0 - - 1.70- 1.90
304 0.08 2.00 0.045 0.030 0.75 18.00 - 20.00 8.00- 10.50 - 0.10 -
304L 0.030 2.00 0.045 0.030 0.75 18.00 - 20.00 8.00- 12.00 - 0.10 -
309s 0.08 2.0 0.045 0.030 1.0 22.0/24.0 12.0/15.0      
310 0.25 2.0 0.045 0.030 1.50 24.0/26.0 19.0/22.0      
310S 0.08 2.00 0.045 0.030 1.50 24.00- 26.00 19.00 - 22.00 - - -
316 0.08 2.00 0.045 0.030 0.75 16.00 - 18.00 10.00 - 14.00 2.00 - 3.00 0.10 -
316L 0.030 2.00 0.045 0.030 0.75 16.00 - 18.00 10.00 - 14.00 2.00 - 3.00 0.10 -
317 0.08 2.00 0.045 0.030 0.75 18.00 - 20.00 11.00 - 14.00 3.00 - 4.00 0.10 -
317L 0.030 2.00 0.045 0.030 0.75 18.00 - 20.00 11.00 - 15.00 3.00 - 4.00 0.10 -
321 0.08 2.00 0.045 0.030 0.75 17.00 - 19.00 9.00 - 12.00 - 0.10 Ti5 ( C + N ) Min or 0.70 max
347 0.08 2.00 0.045 0.030 0.75 17.00 - 19.00 9.00 - 13.00 - - Cb= 10x ( C Min ) or 1.00 Max
409 0.08 1.00 0.040 0.010 1.00 10.50 - 11.75 0.50 - - Ti= 6x (C+ N ) Min or 0.70 Max
409M 0.03 0.81.2 0.030 0.030 0.40.75 11.00- 12.00 1.5 max. - - Ti= 6x (C) Min or 0.70 Max
410S 0.08 1.00 0.040 0.030 1.00 11.50- 13.50 0.60 - - -
410 0.15 1.00 0.040 0.030 1.00 11.50- 13.50 0.75 - - -
420 0.35 0.50 0.035 0.015 0.50 12.00 - 13.00 0.20.3 - - -
440A 0.60/0.70 1.0 0.040 0.030 1.0 16.0/18.0 - - - -
440B 0.75,0.95 1.0 0.040 0.030 1.0 16.0/18.0 - - - -
440C 0.95, 1.2 1.0 0.040 0.030 1.0 16.0/18.0 - - - -
430 0.12 1.00 0.040 0.030 1.00 16.00 - 18.00 0.75 - - -
JSL AUS 0.08 7.08.0 0.070 0.030 0.75 15.50 - 16.50 4.25 - 4.75 - - 0.9 - 1.10
904L 0.02 2.00 0.030 0.045 1.00 19.0-23.0 23.0-28.0 - - 23.0-28.0
2205 0.03 2.00 0.030 0.020 1.00 21.0-23.0 4.5-6.5 4.5-6.5    
2207 0.030 1.20 0.035 0.020 0.30 24.0-26.0 6.0-8.0 - - 6.0-8.0
* Thickness of 1.27mm & below will have elongation of 20% min.

Stainless Steel Mechanical Properties

MECHANICAL PROPERTIES
Grade Tensile Yield %Age Hardness (Max) -
- Strength Mpa, (Min) Strength Elongation - -
- - Mpa, (Min) in 50mm - -
- - - gauge length min BHN Rb
301 515 205 40 217 95
304 515 205 40 201 92
304L 485 170 40 201 92
310S 515 205 40 217 95
316 515 205 40 217 95
316L 485 170 40 217 95
317 515 205 35 217 95
317L 515 205 40 217 95
321 515 205 40 217 95
347 515 205 40 201 92
409 380 170 20 179 88
409M 430 275 20 187 90
410S 415 205 22 183 89
410 450 205 20 217 89
420 700( max ) - 15 217 95
430 450 205 22 183 89
JSL AUS 515 205 40 217 95
JS- 203 515 205 40 217 95
301M 515 205 40 217 95

Nickel Alloy Chemical Properties

U.S.A. / GROSSBRITAINNIE- U.S.A. / GRANDE-BRETAGNE-- U.S.A. / GREAT BRITAIN
Handelsbezeichung C% Co% Cr% Mo% Ni% V% W% Ai% Cu% Nb/Cb Ta% Ti% Fe% Sonstige Autres-Other%
Designation Comercial - - - - - - - - - - - - -
Comercial designation - - - - - - - - - - - - -
Monel 400 0.12 - - - 65 - - - 32 - - 1.5 Mn 1.0
Monel 401 0.1 - - - 43 - - - 53 - - 0.75 Si 0.25; Mn 2.25
Monel 404 0.15 - - - 52.0-57.0 - - 0.05 rest/bal - - 0.5 Mn 0.10; Si 0.10;S o.024
Monel 502 0.1 - - - 63.0-17.0 - - 2.5-3.5 rest/bal - 0.5 2 Mn 1.5;Si 0.5; S 0.010
Monel K 500 0.13 - - - 64 - - 2.8 30 - 0.6 1 Mn 0.8
Monel R 405 0.15 - - - 66 - - - 31 - - 1.2 Mn 1.0; S 0.04
Hastelloy B 0.1 1.25 0.6 28 rest/bal 0.3 - - - - - 5.5 Mn 0.80; Si 0.70
Hastelloy B2 0.02 1 1 26.0-30.0 rest/bal - - - - - - 2 Mn 1.0: Si 0.10
Hastelloy C 0.07 1.25 16 17 rest/bal 0.3 40 - - - - 5.75 Mn 1.0 :Si 0 0.70
Hastelloy C4 0.015 2 14.0-18.0 14.0-17.0 rest/bal - - - - - 0..70 3 Mn 1.0 ; Si 0.08
Hastelloy- C 276 0.02 2.5 14.0-16.5 15.0-17.0 rest/bal 0.35 3.0-4.5 - - - - 4.0-7.0 Mn 1.0;Si 0.05
Hastelloy F 0.02 1.25 22 6.5 rest/bal - 0.5 - - Nb2.10 - 21 Mn 1.50;Si 0.50
Hastelloy G 0.05 2.5 21.0-23.5 5.5-7.5 rest/bal - 1 - 1.5-2.5 Nb1.75-2.5 - 18.0-21.0 Mn 1.0-2.0;p0.04;Si 1.0;80.03
Hastelloy G-2 0.03 - 23.0-26.0 5.0-7.0 47.0-52.0 - - - 0.70-1.20 - 0.70-1.50 rest/bal Mn 1.0;Si 1.0
Hastelloy N 0.06 0.25 7 16.5 rest/bal - 0.2 - 0.1 - - 3 Mn 0.40;Si 0.25;B0.01
Hastelloy S 0.02 2 15.5 14.5 rest/bal 0.6 1 0.2 - - - 3 Mn 0.50;Si 0.40;B0.0009;LA 0.02
Hastelloy W 0.06 1.25 5 24.5 rest/bal - - - - - - 5.5 Mn 0.050 ; Si 0.50
Hastelloy X 0.1 1.5 22 9 rest/bal - 0.6 - - - 18.5 - Mn 0.6; Si 0.60
Incoloy 800 0.04 - 21 - 32 - - 0.3 - - 0.4 45 -
Incoloy 800 H 0.08 - 21 - 32 - - 0.3 - - 0.4 45 -
Incoloy 801 0.05 - 20.5 - 32 - - - - - 1.1 45 -
Incoloy 802 0.35 - 21 - 32 - - 0.6 - - 0.7 45 -
Incoloy 804 0.05 - 29.5 - 41 - - 0.3 - - 0.6 25.4 -
Incoloy 805 0.12 - 7.5 0.5 36 - - - 0.1 - - rest/bal Mn 0.60;Si 0.50
Incoloy 810 0.25 - 21 - 32 - - - 0.5 - - rest/bal Mn 0.90; Si 0.80
Incoloy 825 0.04 - 21 3 42 - - - 2 - 1 30 -
Incoloy 825 Cp 0.04 - 21.5 3 42 - - - 2.2 Nb0.9 - 30 -
Incoloy 840 0.08 - 20 - 20 - - - - - - rest/bal Mn 1.0;Si 1.0
Incoloy 901 0.05 - 12.5 6 rest/bal - - 0.15 - - 2.7 34 Mn 0.24;Si 0.12;B0.015
Incoloy 901 Mod 0.05 - 12.5 5.8 rest/bal - - - - - 2.9 34 Mn 0.09;Si 0.08;B0.015
Incoloy 903 0.02 15 - - 38 - - 0.7 - Nb 3.0 1.4 41 -
Incoloy 904 0.02 14 - - 33 - - - - - 1.7 50 -
Incoloy DS 0.06 - 18 - 37 - - - - - - 42 Mn 1.0; Si 2.3
Incoloy Ma- 956 - - 20 - - - - 4.5 - - 0.5 74.4 Y2.03 0.5
Incoloy 600 0.05 - 15.5 - 75 - - - - - - 8 -
Incoloy 601 0.05 - 23 - 60 - - 1.4 - - - 14 -
Incoloy 604 0.04 - 15.8 - rest/bal - - - 0.1 Nb 2.0 - 7.2 Mn 0.20; Si 0.20
Incoloy 610 0.2 - 15.5 - rest/bal - - - 0.5 Nb 1.0 - 9 Mn 0.90;Si 2.0
Incoloy 617 0.07 12.5 22.5 9 54 - - 1 - - - - -
Incoloy 625 0.05 - 21.5 9 61 - - 0.4 - Nb 3.65 0.4 2.5 Mn 0.50; Si 0.50
Incoloy 671 0.05 - 48 - 51 - - - - - 0.35 - -
Incoloy 700 0.12 28.5 15 3.75 46 - - 3 0.05 - 2.2 0.7 Mn 0.10; Si 0.30
Incoloy 702 0.04 - 15.6 - rest/bal - - 3.4 0.1 - 0.7 0.35 Mn 0.05: Si 0.20
Incoloy 705 0.3 - 15.5 - rest/bal - - - 0.5 - - 8 Mn 0.90 ; Si 5.5

Carbon Steel Chemical Properties

Low Carbon Steel grade Chemical Composition
Grade UNS
Number		 S
(max)		 C
(max)		 P
(max)		 Mn
(max)		 Si Cr Ni Mo
1010 G10100 .05% .08-.13% .04% .30-.60% – – – –
1018 G10180 .05% .14-.20% .04% .60-.90% – – – –
1020 G10200 .05% .17-.23% .04% .30-.60% – – – –
1022 G10220 .05% .17-.23% .04% .70-1.00% – – – –

 

Medium Carbon Steel Grades Chemical Properties
Grade UNS
Number		 Mn
(max)		 S
(max)		 C
(max)		 P
(max)		 Si Cr Ni Mo
1010 G10100 .30-.60% .05% .08-.13% .04% – – – –
1018 G10180 .60-.90% .05% .14-.20% .04% – – – –
1020 G10200 .30-.60% .05% .17-.23% .04% – – – –
1022 G10220 .70-1.00% .05% .17-.23% .04% – – – –

Carbon Steel Mechanical Properties

Alloy Type

AISI

Carbon content (wt.%)

Yield strength (MPa)

Tensile strength (MPa)

Ductility (% elongation in 50 mm)

Low

1010

.10

180

325

28

Low

1020

.20

205

380

25

Low

A36

.29

220

400

23

Low

A516 Gr 70

.31

260

485

21

Medium

1030

.27 – .34

325

460

12

Medium

1040

.37 – .44

415

620

25

High

1080

.75 – .88

440

924

12

High

1095

.90 – 1.04

380

665

10

Duplex Steel Chemical Properties

  C Mn Si P S Cr Mo Ni N
2205
(S31803)		 0.03
max		 2.0
max		 1.0
max		 0.03
max		 0.02
max		 min: 21.0
max: 23.0		 min: 2.5
max: 3.5		 min: 4.5
max: 6.5		 min: 0.08
max: 0.20
2205
(S32205)		 0.03
max		 2.0
max		 1.0
max		 0.03
max		 0.02
max		 min: 22.0
max: 23.0		 min: 3.0
max: 3.5		 min: 4.5
max: 6.5		 min: 0.14
max: 0.20

 

% 2205 UR52N+
C 0-0.03 0.03 max
Mn 2.0 1.5
Si 1.0 0.8
P 0-0.03 0.035
S 0-0.02 0.02
Cr 21-23 24-26
Mo 2.5-3.5 3.0-5.0
Ni 4.5-6.5 5.5-8.0
N 0.08-0.2 0.2-0.35
Cu - 0.5-3.0

Duplex Steel Mechanical Properties

Grade 2205 UR52N+
Tensile Strength (MPa) 620 770
Proof Stress 0.2% (MPa) 450 550
Elongation A5 (%) 25 25

Super Duplex Steel Chemical Properties

Element Min Max
C - 0.03
Cr 24 26
Cu 0.5 1
Mn - 2
Mo 3 5
N 0.24 0.35
Ni 6 8
P - 0.35
S - 0.015
Si - 1

Super Duplex Steel Mechanical Properties

Temper Annealed
Tensile Rm 115 ksi (min)
Tensile Rm 800 MPa (min)
R.p. 0.2% Yield 80 ksi (min)
R.p. 0.2% Yield 550 MPa (min)
Elongation (2” or 4D gl) 15 % (min)

Inconel Chemical Properties

Inconel Grade C Mg S P Cr Si Mo Ni Co Cu Al Ti Ni I B
Inconel 600 0.15 1.00 0.015 - 14.0–17.0 0.50 - - - 0.50 - - 72.0max 6.0–10.0 -
Inconel 617 0.15 0.50 0.015 0.015 20.0–24.0 0.50 8.0–10.0 - 10.0–15.0 0.50 0.8–1.50 0.60 44.2–56.0 3.00max 0.006
Inconel 625 0.10 0.50 0.015 0.015 20.0–23.0 0.50 8.0–10.0 3.15–4.15 1.00 - 0.40 0.40 58.0max 5.00max -
Inconel 690 0.019 0.35 0.003 - 30.0max 0.35 - - - 0.01 0.02 - 59.5max 9.20max -
Inconel 718 0.08 0.35 0.015 0.015 17.0–21.0 0.35 2.8–3.3 4.75–5.5 1.00 0.2–0.8 0.65–1.15 0.30 50.0–55.0 balance 0.006
Inconel X-750 0.08 1.00 0.01 - 14.0–17.0 0.50 - 0.7–1.2 1.00 0.50 0.4–1.0 2.25–2.75 70.0max 5.0–9.0 -

Inconel Mechanical Properties

Inconel Grade Tensile Strength Yield Strength (0.2%Offset) Density Melting Point Elongation
Inconel 600 Psi – 95,000 , MPa – 655 Psi – 45,000 , MPa – 310 8.47 g/cm3 1413 °C (2580 °F) 0.4
Inconel 601 Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 8.1 g/cm3 1411 °C (2571 °F) 0.3
Inconel 617 ≥ 485 MPa ≥ 275 MPa 8.3g/cm³ 1363°C 0.25
Inconel 625 Psi – 135,000 , MPa – 930 Psi – 75,000 , MPa – 517 8.4 g/cm3 1350 °C (2460 °F) 0.425
Inconel 690 ≥ 485 MPa ≥ 275 MPa 8.3g/cm³ 1363°C 0.25
Inconel 718 Psi – 135,000 , MPa – 930 Psi – 70,000 , MPa – 482 8.2 g/cm3 1350 °C (2460 °F) 0.45
Inconel 725 1137 MPa 827 MPa 8.31 g/cm3 1271°C-1343 °C 0.2
Inconel X-750 1267 MPa 868 MPa 8.28 g/cm3 1430°C 0.25

Monel Chemical Properties

Grades Ni% C% Ti% Ai% Cu% Fe% Sonstige Autres-Other %
Alloy 400 65.0 0.12 - - 32.0 1.5 Mn 1.0
Alloy 401 43.0 0.10 - - 53.0 0.75 Si 0.25; Mn 2.25
Alloy 404 52.0-57.0 0.15 - 0.05 rest/bal 0.50 Mn 0.10; Si 0.10;S o.024
Alloy 502 63.0-17.0 0.10 0.50 2.5-3.5 rest/bal 2.0 Mn 1.5;Si 0.5; S 0.010
Alloy K 500 64.0 0.13 0.6 2.8 30.0 1.0 Mn 0.8
Alloy R 405 66.0 0.15 - - 31.0 1.2 Mn 1.0; S 0.04

Monel Mechanical Properties

Mechanical Analysis
Tensile strength, Ultimate 550 Mpa
Tensile strength, Yield 240 Mpa
Elongation at Break 48%

Hastelloy Chemical Properties

Alloy C Cot Cr Mo V W Al Cu Ni Ti

I

 Ni Other%
B 0.10max 1.25max 0.60max 28.00max 0.30max - - - - - 5.50max Bal Mn 0.80; Si 0.70
B2 0.02max 1.00max 1.00max 26.0-30.0 - - - - - - 2.00max Bal Mn 1.0, Si 0.10
C 0.07max 1.25max 16.00max 17.00max 0.30max 40.0max - - - - 5.75max Bal Mn 1.0; Si 0.70
C4 0.015max 2.00max 14.0-18.0 14.0-17.0 - - - - - 0.70max 3.00max Bal Mn 1.0 ; Si 0.08
C276  0.02max 2.50max 14.0-16.5 15.0-17.0 0.35max 3.0-4.5 - - - - 4.0-7.0 Bal Mn 1.0; Si 0.05
G 0.05max 2.50max 21.0-23.5 5.5-7.5 - 1.00max - 1.5-2.5 1.7-2.5 - 18.0-21.0 Bal Mn 1.0-2.0; P0.04; Si 1.0; 
N 0.06max 0.25max 7.00max 16.50max - 0.20max - 0.10max - - 3.00max Bal Mn 0.40; Si 0.25; B 0.01
S 0.02max 2.00max 15.50max 14.50max 0.60max 1.00max 0.20max - - - 3.00max Bal Mn 0.50; Si 0.40; B0.0009; La 0.02
W 0.06max 1.25max 5.00max 24.50max - - - - - - 5.50max Bal Mn 0.050; Si 0.50
X 0.10max 1.50max 22.0max 9.00max - 0.60max - - - 18.50max - Bal Mn 0.6; Si 0.60

Hastelloy Mechanical Properties

Alloy Tensile Strength Yield Strength (0.2%Offset) Density Melting Point Elongation
Alloy C22 Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 8.69 g/cm3 1399 °C (2550 °F) 0.45
Alloy C276 Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 8.89 g/cm33 1370 °C (2500 °F) 0.4
Alloy B2 Psi – 1,15,000 , MPa –760 Psi – 52,000 , MPa – 350 9.2 g/cm3 1370 °C (2550 °F) 0.4
Alloy B3 Psi – 1,15,000 , MPa –760 Psi – 52,000 , MPa – 350 9.2 g/cm3 1370 °C (2550 °F) 0.4
Alloy C4 783 365 8.64 g/cm3 1350-1400 °C 0.55
Alloy X 655 MPa 240 MPa 8.22 g/cm³ 1355°C 0.35

Round Bar Weight Chart in mm, Kg, Ft

Size in mm Average Weight
KG/MTR KG/FT
10 0.62 0.18
12 0.90 0.30
14 1.20 0.40
16 1.60 0.50
18 2.00 0.60
20 2.50 0.80
22 3.00 0.90
24 3.56 1.08
25 3.90 1.20
28 4.80 1.50
30 5.55 1.69
32 6.30 1.90
34 7.14 2.18
36 8.00 2.44
40 9.90 3.00
45 12.49 3.81
50 15.40 4.70
56 19.34 5.89
60 22.20 6.80
63 24.47 7.46
63.5 24.86 7.58
65 26.05 7.94
70 30.20 9.20
73 32.86 10.00
75 34.72 10.58
78 37.51 11.43
80 39.50 12.00
83 42.47 12.95
85 44.55 13.58
90 50.00 15.20
92 52.19 15.91
93 53.39 16.27
95 55.65 16.95
100 61.66 18.79
105 67.98 20.72
110 74.60 22.74
115 81.64 24.88
125 96.34 29.36

Flanges Weight Chart

Flange Weights by Pressure Class and Size
Pipe Size 150 # 300 # 600 # 900 # 1500 # 2500 #
WN SO BLD WN SO BLD WN SO BLD WN SO BLD WN SO BLD WN SO BLD
1/2" 2 1 1 2 1 1 2 2 2 SEE 1500 # WEIGHTS 5 4 4 7 7 7
3/4" 2 2 2 3 3 3 4 3 3 SEE 1500 # WEIGHTS 6 5 6 8 8 8
1" 3 2 2 4 3 3 4 4 4 SEE 1500 # WEIGHTS 9 8 8 12 11 11
1 1/2" 4 3 3 7 6 6 8 7 8 SEE 1500 # WEIGHTS 13 12 13 25 22 23
2" 6 5 5 9 7 8 12 9 10 SEE 1500 # WEIGHTS 25 25 25 42 37 39
2 1/2" 8 7 7 12 10 12 18 13 15 SEE 1500 # WEIGHTS 36 36 35 52 55 56
3" 10 8 9 15 13 16 23 16 20 31 26 29 48 48 48 94 83 86
4" 15 13 17 25 22 27 42 37 41 53 53 54 73 73 73 145 125 130
5" 19 15 20 32 28 35 68 63 68 86 83 87 130 130 140 245 210 225
6" 24 19 26 42 39 50 81 80 86 110 110 115 165 165 160 380 325 345
8" 39 30 45 67 58 81 120 115 140 175 170 200 275 260 300 580 485 530
10" 52 43 70 91 81 124 190 170 230 260 245 290 455 435 510 1075 930 1025
12" 80 64 110 140 115 185 225 200 295 325 325 415 690 580 690 1525 1100 1300
14" 110 90 140 180 165 250 280 230 355 400 400 520 940 NA 975 NA NA NA
16" 140 98 180 250 190 295 390 330 495 495 425 600 1250 NA 1300 NA NA NA
18" 150 130 220 320 250 395 475 400 630 680 600 850 1625 NA 1750 NA NA NA
20" 180 165 285 400 315 505 590 510 810 830 730 1075 2050 NA 2225 NA NA NA
22" 225 185 355 465 370 640 720 590 1000 NA NA NA NA NA NA NA NA NA
24" 260 220 430 580 475 790 830 730 1250 1500 1400 2025 3325 NA 3625 NA NA NA

Flanges Dimension Chart

DN
(inch)		 Dimension ANSI B16.5 Flange Dimensional Sizes 3 to 10 inches Table Chart
125 lbs
150 lbs		 300 lbs 400 lbs 600 lbs 900 lbs 1500 lbs 2500 lbs
inch mm inch mm inch mm inch mm inch mm inch mm inch mm
3 A 7 1/2 190.5 81/4 209.6 81/4 209.6 8 1/4 209.6 9 1/2 241 10 1/2 267 12 305
b 15/16 23.8 1 1/8 28.6 11/4 31.8 1 1/4 31.8 1 1/2 38.1 1 7/8 47.6 2 5/8 66.7
D2 5 127 5 127 5 127 5 127 5 127 5 127 5 127
D1 6 152.4 6 5/8 168.3 6 5/8 168.3 6 5/8 168.3 71/2 190.5 8 203 9 228.6
n 4 4 8 8 8 8 8 8 8 8 8 8 8 8
d 3/4 19 7/8 22.2 7/8 22.2 7/8 22.2 1 25.4 1 1/4 31.8 1 3/8 34.9
3 1/2 A 8 1/2 215.9 9 228.6 9 228.6 9 228.6 - - - - - -
b 15/16 23.8 13/16 30.2 13/8 34.9 13/8 34.9 - - - - - -
D2 5 1/2 139.7 5 /2 139.7 5 1/2 139.7 5 1/2 139.7 - - - - - -
D1 7 177.8 7 1/4 184.2 7 1/4 184.2 7 1/4 184.2 - - - - - -
n 8 8 8 8 8 8 8 8 - - - - - -
d 3/4 19 7/8 22.2 1 25.4 1 25.4 - - - - - -
4 A 9 228.6 10 254 10 254 10 3/4 273 11 1/2 292 12 1/4 311 14 356
b 15/16 23.8 1 1/4 31.7 1 3/8 34.9 1 1/2 38.1 1 3/4 44.4 2 1/8 54 3 76.2
D2 6 3/16 157.2 6 3/16 157.2 6 3/16 157.2 6 3/16 157.2 6 3/16 157.2 6 3/16 157.2 6 3/16 157.2
D1 7 1/2 190 7 7/8 200 7 7/8 200 8 1/2 215.9 9 1/4 235 9 1/2 241 10 3/4 273
n 8 8 8 8 8 8 8 8 8 8 8 8 8 8
d 3/4 19 7/8 22.2 1 25.4 1 25.4 1 1/4 31.8 1 3/8 34.9 1 5/8 41.3
5 A 10 254 11 279.4 11 279.4 13 330.2 13 3/4 349 14 3/4 375 16 1/2 419
b 1 5/16 23.8 13/8 34.9 1 1/2 38.1 1 3/4 44.4 2 50.8 2 7/8 73 3 5/8 92.1
D2 7 5/16 185.7 7 5/16 185.7 7 5/16 185.7 7 5/16 185.7 7 5/16 185.7 7 5/16 185.7 7 5/16 185.7
D1 8 1/2 215.9 9 1/4 234.9 9 1/4 234.9 10 1/2 266.7 11 279 11 1/2 292 12 3/4 324
n 8 8 8 8 8 8 8 8 8 8 8 8 8 8
d 7/8 22.2 7/8 22.2 1 25.4 1 1/8 28.6 1 3/8 34.9 1 5/8 41.3 1 7/8 47.6
6 A 11 279 12 1/2 317.5 12 1/2 317.5 14 355.6 15 381 15 1/2 394 19 483
b 1 25.4 17/16 36.5 1 5/8 41.3 1 7/8 47.6 2 3/16 55.6 3 1/4 82.6 4 1/4 108
D2 8 1/2 216 8 1/2 215.9 8 1/2 215.9 8 1/2 215.9 8 1/2 215.9 8 1/2 215.9 8 1/2 216
D1 9 1/2 241 10 5/8 269.9 10 5/8 269.9 11 1/2 292.1 12 1/2 318 12 1/2 318 14 1/2 368
n 8 8 12 12 12 12 12 12 12 12 12 12 8 8
d 7/8 22.2 7/8 22.2 1 25.4 1 1/8 28.6 1 1/4 31.8 1 1/2 38.1 2 1/8 54
8 A 13 1/2 342.9 15 381 15 381 16 1/2 419 18 1/2 470 19 482.6 21 3/4 552
b 1 1/8 28.6 1 5/8 41.3 1 7/8 47.6 2 3/16 55.6 2 1/2 63.5 3 5/8 92.1 5 127
D2 10 5/8 269.9 10 5/8 269.9 10 5/8 269.9 10 5/8 269.9 10 5/8 269.9 10 5/8 269.9 10 5/8 269.9
D1 11 3/4 298.4 13 330.2 13 330.2 13 3/4 349.2 15 1/2 394.2 15 1/2 394.2 17 1/4 438
n 8 8 12 12 12 12 12 12 12 12 12 12 12 12
d 7/8 22.2 1 25.4 1 1/8 28.6 1 1/4 31.8 1 1/2 38.1 1 3/4 44.5 2 1/8 54
10 A 16 406.4 17 1/2 444.5 17 1/2 444.5 20 508 21 1/2 546 23 584 26 1/2 673
b 1 3/16 30.2 1 7/8 47.6 2 1/8 54 2 1/2 63.5 2 3/4 69.8 4 1/4 108 6 1/2 165
D2 12 3/4 323.8 12 3/4 323.8 12 3/4 323.8 12 3/4 323.8 12 3/4 323.8 12 3/4 323.8 12 3/4 323.8
D1 14 1/4 361.9 15 1/4 387.4 15 1/4 387.4 17 431.8 18 1/2 470 19 482.6 21 1/4 540
n 12 12 16 16 16 16 16 16 16 16 12 12 12 12
d 1 25.4 1 1/8 28.6 1 1/4 31.8 1 3/8 34.9 1 1/2 38.1 2 50.8 2 5/8 66.7

Pipe Fittings Dimension Chart

Pipe Fittings Nominal Size Pipe Fittings Outside
Diameter Y		 Wall Thickness T
(Pipe Fittings  Schedule)		 45 Deg. Pipe Fittings LR Centre to Face B 45 Deg. Pipe Fittings LR
Weight		 90 Deg. Pipe Fittings LR Centre to Face A 90 Deg. Pipe Fittings LR Weight 90 Deg. Pipe Fittings SR Centre to Face A 90 Deg. Pipe Fittings SR Weight
mm in mm mm Schedule mm kg mm kg mm kg
15 1/2” 21.3 2.78 STD 15.9 0.04 38.1 0.08 – –
3.73 X.S 15.9 0.05 38.1 0.10 – – - - -
20 3/4” 26.7 2.87 STD 11.1 0.04 28.6 0.08 – –
3.91 X.S 11.1 0.05 28.6 0.11 – – - - -
25 1” 33.4 3.38 STD 22.2 0.09 38.1 0.15 25.4 0.11
4.55 X.S 22.2 0.11 38.1 0.19 25.4 0.14 - - -
32 11/4” 42.2 3.56 STD 25.4 0.14 47.6 0.28 31.75 0.18
4.85 X.S 25.4 0.2 47.6 0.39 31.75 0.24 - - -
40 11/2” 48.3 3.68 STD 28.6 0.2 57.1 0.4 38.1 0.26
5.08 X.S 28.6 0.25 57.1 0.5 38.1 0.35 - - -
50 2” 60.3 3.91 STD 34.9 0.36 76.2 0.72 50.8 0.5
5.54 X.S 34.9 0.5 76.2 1.0 50.8 0.68 - - -
65 21/2” 73.0 5.16 STD 44.4 0.73 95.2 1.46 63.5 0.95
7.01 X.S 44.4 0.91 95.2 1.82 63.5 1.27 - - -
80 3” 88.9 5.49 STD 50.8 1.1 114.3 2.18 76.2 1.45
7.62 X.S 50.8 1.45 114.3 2.86 76.2 1.95 - - -
100 4” 114.3 6.02 STD 63.5 2.1 152.4 4.2 101.6 2.8
8.56 X.S 63.5 2.9 152.4 5.7 101.6 3.9 - - -
125 5” 141.3 6.65 STD 79.4 3.4 190.0 6.8 127.0 4.8
9.5 X.S 79.4 5.0 190.0 10.0 127.0 6.5 - - -
150 6” 168.3 7.11 STD 95.2 5.1 229.0 10.1 152.4 6.8
10.97 X.S 95.2 7.7 229.0 15.3 152.4 10.2 - - -
200 8” 219.1 8.18 STD 127.0 10.2 305.0 20.4 203.0 13.6
12.7 X.S 127.0 15.5 305.0 30.9 203.0 20.9 - - -
250 10” 273.9 9.27 STD 159.0 18.1 381.0 36.1 254.0 24.1
12.7 X.S 159.0 24.4 381.0 48.8 254.0 32.5 - - -
300 12” 323.9 9.52 STD 190.0 26.6 457.0 53.1 305.0 35.4
12.7 X.S 190.0 35.0 457.0 70.0 305.0 46.7 - - -
350 14” 355.6 9.52 STD 222.0 34.1 533.0 68.1 356.0 45.4
12.7 X.S 222.0 45.0 533.0 90.0 356.0 60.0 - - -
400 16” 406.4 9.52 STD 254.0 45.0 610.0 89.3 406.0 59.5
12.7 X.S 254.0 59.0 610.0 118.0 406.0 78.7 - - -
450 18” 457.0 9.52 STD 286.0 56.5 686.0 113.0 457.0 75.6
12.7 X.S 286.0 75.0 686.0 150.0 457.0 100.0 - - -
500 20” 508.0 9.52 STD 318.0 85.0 762.0 140.0 508.0 93.5
12.7 X.S 318.0 112.5 762.0 186.0 508.0 124.0 - - -
600 24” 610.00 9.52 STD 381.0 101.5 914.0 203.0 610.0 135.0
12.7 X.S 381.0 134.5 914.0 269.0 610.0 179.0 - - -